Help Center

Contact Support
This site is not supported in Internet Explorer Compatibility mode. Please upgrade your browser or turn of compatibility mode.

Schematic and Parts List

Overview

The schematics on this page will help you identify the parts of your Autoloading VERSA MAX firearm.

VERSA MAX™ Autoloading Shotgun

Exploded View

1vmschem.png


Parts List

Note: Parts are subject to change without notice.

ITEM NO. PART NAME ITEM NO. PART NAME
1 Receiver 27 Feed Latch Spring (A)
2 Magazine Tube 28 Feed Latch Spring (B)
3 Action Spring Tube 29 Bolt Handle
4 Action Spring Follower
Retaining Ring
30 Fore-end
5 Action Spring Follower 31 Pivot Block
6 Action Spring 32 Stock Assembly
7 Action Spring Tube Plug Screw 33 Comb Insert
8 Action Spring Tube Snap Ring 33a *Raised Comb Insert
9 Magazine Retainer 33b *Extra High Comb Insert
10 Receiver Plug Screw (4) 34 Stock Cast Plate Primary (A)
11 Gas Cylinder Plug (2) 34a *Stock Cast Plate Secondary (B)
12 Gas Cylinder Plug O-ring (2) 35 Stock Bolt Washer
13 Gas Piston (2) 36 Stock Bolt Lock Washer
14 Ejector Retainer 37 Stock Bolt
15 Ejector Spring 38 Recoil Pad
16 Ejector 39 Recoil Pad Mounting Screw (2)
17 Middle Sight 40 Bolt Assembly
18 Front Sight Lite Pipe 56 Trigger Plate Assembly
19 Front Sight Base 82 Magazine Cap Swivel Assembly
20 Front Sight Mounting Screw 83 Vent Rib Barrel Assembly
21 Choke Tube 84 Feed Latch Assembly
22 Magazine Spring 85 *Front Sight Accessory Kit
23 Magazine Follower 86 *Length-of-Pull Spacer Kit
24 Trigger Plate Pin 87 *Gas Cylinder Plug Wrench
25 Magazine Plug 88 *Choke Tube Wrench
26 Feed Latch Pivot Pin 89 *VersaMax Hard-case Assembly
    90 *TPA Lock

Schematic is provided for part identification only and should not be used as a guide to assemble the firearm.
* Not Shown

Bolt and Trigger Plate Assembly

Exploded View

2vmschem.png

Bolt and Trigger Plate Assembly Parts List

Note: Parts are subject to change without notice.

Bolt Assembly (40) Trigger Plate Assembly (56)
ITEM NO. PART NAME ITEM NO. PART NAME
41 Bolt Body 57 Trigger Plate
42 Bolt Head 58 Trigger Pin
43 Cam Pin 59 Trigger
44 Extractor 60 Disconnector
45 Extractor Pivot Pin 61 Disconnector Pivot Pin
46 Extractor Spring 62 Disconnector Plunger
47 Firing Pin 63 Disconnector Spring
48 Firing Pin Retaining Pin 64 Safety Button
49 F. P. Retaining Pin O-Ring 65 Safety Detent
50 Link Pivot Pin 66 Safety Detent Retaining Pin
51 Bolt Handle Detent 67 Carrier
52 Bolt Handle Detent Spring 68 Carrier Dog
53 Bolt Handle Detent Retaining Pin 69 Carrier Dog Pivot Pin
54 Firing Pin Spring 70 Carrier Pivot Tube
55 Link Assembly 71 Carrier Dog Spring Strut
    72 Carrier Dog Spring
    73 Feed Latch Release
    74 Feed Latch Release Spring
    75 Trigger Return Spring
    76 Hammer
    77 Hammer Plunger
    78 Trigger Plate Pin Detent
Spring
    79 Hammer Spring
    80 Trigger Stop Pin
    81 Safety Detent Spring

Schematic is provided for part identification only and should not be used as a guide to assemble the firearm.

You must to post a comment.