Help Center

Contact Support
This site is not supported in Internet Explorer Compatibility mode. Please upgrade your browser or turn of compatibility mode.

Why do the current stock and fore-end for the Model 1100/11-87 state that the parts will not interchange with models made before 1982?

Table of contents

Overview

The Model 1100's made before around 1982 had a detent made in the fore-end so that the magazine cap would lock down tight. New fore-ends do not have the detent. The older 1100's can be used with the clam pack parts, however you have to keep a check on the magazine cap every few shots to keep it good and tight. If the cap loosens, the barrel will have a slight movement and cause wear in the receiver.

You must to post a comment.